9 Best Welding Boots

9 Best Work Boots for Welding



1| Dr. Martens Men’s Ironbridge MG ST Steel-Toe Met Guard Boot

The Ironbridge MG lace-to-toe style steps up to include a rigid steel metatarsal guard to create the ultimate work boot. This industrial boot has a steel toe cap, slip resistant sole and has additional insulation that will help protect the wearer against accidental contact with an electrical charge. Rich, water resistant tumbled leather uppers on a welted construction foot bed that offer exceptional stability and durability.

The padded collar and tongue provide great comfort and fit, while the moisture wicking lining and anti-bacterial Smartmask® insole keep your feet dry and safe. The iconic Dr. Martens classic PVC air-cushioned sole is resistant to oil, fat, petrol and alkali. These steel-toe boots offer one of the best fits that we had the opportunity to try. The leather upper is complimented by a synthetic sole, with a ballistic mesh padded collar that helps to provide comfort without causing sweat. The insole was extremely comfortable, but is also removable if you have a specific orthotic that needs to be worn. It is a slip-resistant boot as well, rated for fuel, fats, and oil. If you weld full-time, these boots are going to be your best friend.

2| Timberland PRO Men’s 53530 8″ Metguard Steel-Toe Boot


Protection in every direction: These MetGuard steel toe boots are flexible, lightweight, breathable and comfortable. They’re built to exceed the ASTM safety standard for impact, compression resistance and metatarsal impact, and your standards, too. This is another Metguard steel-toe boot design, though it offers more of a high-top fit than comparable boots from other brands. These boots are also rated to be waterproof, which is a definite plus for some welding environments. It’s a leather upper with a standard synthetic sole that stays comfortable on your foot for all day wear. The boots do tend to run a little hot because of the design, but nothing that a good pair of socks can’t fix. If you need a welding boot that gives your foot a full amount of support, this is the one that you’ll want. They’re outstanding.

3| Delta Plus Panoply Cobra 3 S1P Mens Black Leather Welders Welding Safety Boots

If you’re tired of dealing with laces and guards that just don’t stay fastened, then this boot offers an affordable alternative. It features a Velcro-fastened metatarsal flap, allowing you to slip on the boots and get to work. The sole is lightly cleated and offers a slip-resistant wearing experience, with Kevlar sewn into the seams so that the boot won’t fall apart on you prematurely. It also has a steel-toe cap that provides a certain level of crush resistance, while the shock resistance along the foot and up to the knee is improved so you don’t feel fatigue while standing and welding for long period of time.

Delta Plus Panoply Cobra III S3 SRC Black Mens Leather Safety Boots are high cut safety boots with welding protection from the Delta Plus Classic+ range. The safety boots feature a 200 joule steel toe cap, penetration resistant steel midsole and Velcro fastened leather flap to protect against welding spatter. Additional features of the workboots are additional arch support, an energy absorbing heel and an oil and solvent resistant, cleated outsole, for extra grip in demanding conditions. The work boots are also anti-static making them extremely versatile and suitable for use in a variety of situations.

4| Caterpillar Men’s Revolver Pull-On Steel-Toe Boot

Meet the no nonsense work boot offering all day endurance along with quality comfort construction. The pull-on style makes for easy wearing while the durable rubber outsole features slip resistance and a steel toe for protection.

If you’re looking for a welding boot that can give your shin some additional protections that a high-top boot cannot, then this pull-on steel-toe boot is a good option to look at. The Revolver is made with a full-grain leather, giving you a durability that other boots just can’t provide today. The design incorporates a dual-pull zone so you equalize the pressure that is placed on the boot while putting it on, preventing premature wear. The outsole is rated to be slip-resistant and the construction is tough. Give them some time to get them broken in and you’ll love wearing them when it’s time to weld.

5| Stanley Men’s Dredge Steel-Toe Work Boot

This casual appearing pull on provides all the comfort and protection that a worker requires to do the job right. A full grain leather upper with side panels of stretchable fabric for easy on and off compliment the steel toe that provides the necessary protection. The Dredge is injected Polyurethane midsole/outsole absorbs shock and is lightweight and flexible which reduces fatigue from being on your feet all day. The outsole is slip and oil resistant.

This is a low-top full-grain leather work boot that gives you a different feel for long-term wear. Created in the Chelsea style, the fit is about mid-ankle and there are front and rear pull straps so you can slip this boot on with ease. There’s a removable EVA insole and an additional cavity available so you can structure the right amount of cushioning with your foot. Equipped with a sturdy heel and a slip-resistant outsole, the lining of the shoe also prevents sweat build-up when you’re on your feet all day. It’s a solid buy.

6| GW Men’s 1606ST Steel Toe Work Boots


The Steeltoes feature premium full-grain nubuck leathers, durable rubber outsole with goodyear welt technology for slip resistant and protection. The boots set new industry standards for craftsmanship, durability and protection. This Steel Toe boot is everything a work boot should be: safe, tough and comfortable.Meanwhile you only pay a fraction of what you pay for those name-brands boots.

7| Rhino Men’s 6MS01 6″ Steel Toe Metatarsal Leather Work Boot

These work boots from Rhino are made of genuine leather. They are carefully crafted to give you the ultimate experience in protective footwear. They will protect you from all your occupational hazards, and are even made to over resistance to electrical hazards. The soles, made from natural rubber, make sure that your tread is sure-footed. You are never in any danger of slipping, be it in oil or water.

Comfort, durability and dependability. RHINO Safety Toe boots focus on these core values in providing foot protection. This safety boot meets the applicable standard for protective footwear as defined by the ASTM standards F 2413-05, Standard Test Methods for Foot Protection and ASTMF 2413-05, Standard Specification for Performance Requirements for Foot Protection.
8: Caterpillar Men’s Assault Work Boot


Caterpillar Assault Steel Toe Work Boots… your weapon in the battle for comfort! Send out a ground “Assault” each day at work! Rugged terrain and iffy conditions are no match for Assault Work Boots! They’re as tough as you are, equipped with full-grain leather uppers and goodyear welt construction for years of wear.Comfortable? You bet! Clinasphere lining and sock liner work to cushion the impact of each step, and wick away moisture for a bone-dry interior. Got a case of “butterfingers”? For protection from fallng objects, you’ll appreciate a metatarsal guard on the outside of the boot. More: Rubber midsole for shock absorption; Steel shank for stability; Steel toe provides safety up front; Each Boot weighs approx. 24 oz. State Size. Provides the comfort and protection you want!

8| Rocky Men’s Iron Clad Eight Inch Work Boot


Build to withstand the toughest environments, The Rocky Iron Clad leather men’s lace up 6 “ work boot will keep you on your feet for hours of work. Designed with the premium waterproof technology, Rocky Vapor Pass, this waterproof boot has everything you could need and more. Featuring oil and slip resistant rubber outsoles for extra resistance on slippery surfaces as well as Goodyear welt construction for ultra-durability. Pig skin leather collars combined with a steel shank provide soft leathers and superior under foot support. The comfort tracks insoles complete the comfort package, making this boot a must buy for your work day. ASTM certified composite toes allow for safety and peace of mind on the job site. Comfort, performance and durability are staples of the Rocky Governor Boots, get yours today.

9|Harley-Davidson Men’s Jake Boot

If you’re not wearing the Steel Toe Jake Safety Boots, your work place footwear protection could be less than jake. In addition to the steel toe assets, the Jake features an external metatarsal guard, enhancing the protection and stylized look of this safety boot. Featuring a full-grain leather upper, a full-length cushion sock lining, an oil-resistant rubber outsole with Goodyear® welt construction, and steel toe caps compliant with individually fitting left & right safety toe cap requirements.

Safety ratings as dictated by ASTM F2413-11: M I/75, C/75, Mt/75, EH. And, the YKK® locking inside zipper assures an easy on/off experience. With ankle cushions, the iconic Bar & Shield® and the orange accent top stitching, the quality is in the details. The external metatarsal guide snaps firmly into place and features an orange signature Harley-Davidson® logo. Shaft height 5.5″. Heel height 1.5″. Black. Leather. Wolverine. D95055

Need A Good Pair of Welding Boots?

A good pair of welding boots will protect the feet from the hazards of heat such as molten metal or welding sparks. In addition to protecting the feet from the extreme heat of molten metal, welding boots also keep hot metal from lodging in tongues, shoe eyelets or other shoe parts. A good pair of welding boots is also great for metal fabricators, machinists, factory workers or anyone else with heavy-duty jobs that require heavy-duty service and protection.

Good boots used for welding must have heat-resistant and impact-resistant soles to protect the worker’s feet against hot surfaces that is common in paving, roofing and hot metal factories. The metal soles in the boots will protect the the feet against puncture wounds. The work boots are also available for electrical situations requiring elevated safety considerations, they are constructed to be electrically conductive to prevent the buildup of static electricity.

Most workers are actually injured when performing their normal job duties. To eliminate injuries you should assess the work environment to determine any possible foot hazards and how you can protect yourself against them. This initial assessment is important in a Personal Protective Equipment (PPE) program because it helps you choose the right footwear for each job and hazard. Typical foot hazards to look out for during your assessment are sharp objects from tools or raw materials; falling or rolling objects like boxes, materials, carts, and equipment; wet, slippery surfaces from spills or bad weather, electrical shock and hot surfaces.


A comfortable pair of boots can prevent backaches as well as aching feet. The most important element in a good safety boot or shoe is how well it fits the wearer. Because proper fit is very crucial, select your boots at the end of the day when the feet are a bit swollen and have both feet measured. The best fit should be the length of the longer foot and the width of the wider one. Usually, a cheap pair of boots will be harder to break in and you will suffer from blisters and aching feet. A good pair of welding boots will not only protect you from the heat, slag, and sparks, they will also be comfortable and durable.

Types of Boots: What are my options

* Leather boots are the most popular choice because they are water resistant and for their durability.

* Steel toe work boots are an ideal choice for many industrial situations for they are specifically designed to protect the feet from common industrial accidents, such as cuts punctures and falling objects. The sole and entire shoe box are reinforced with steel to provide insulation against extreme temperatures and may be equipped with special soles to guard against slipping and chemical or electrical hazards. Best suited for those who work in constructions or jobs that entails working around heavy objects.

* Electrical hazard boots are designed with a properly insulated steel toe and no conductive materials to prevent those working with electricity from electrical hazards.

* Insulated work boots are ideal to keep your feet warm when you work in the cold, wet conditions.- These types of work boots are often used in welding operations for it has the quick-release fasteners or elasticized insets feature that allows speedy removal of any hazardous substance that might get into the boot itself.

More Options

* Slip-resistant work boots as the name suggests will prevent you from slipping when working on slippery floors.

* Traditional black leather military boots with a leather upper and hard sole.

* Cowboy boots are mostly seen these days in fashion and at work. Evidently, there are not a lot of work boot choices out there but whatever your specific requirements are, make sure to check the American National Standards Institute (ANSI) label inside each shoe and find out if it meets the established safety standards.

Heavier boots will last longer than lighter boots because lighter boots are made up of less durable materials that compress more. They also eliminate pressure in specific areas that can lead to pain since it disperses the weight evenly on the feet.


Leave a Comment